Overview list of cross-sectional loading data for stress/strain calculations (Output Table)

Data description/Result options:

ELEM:

Number of element where stress/strain calculations are to be performed at the mid cross-section

PRESS*F:

Specified internal pressure in pipeline at element

(Pressure from table PRESS is multiplied by applicable load factors Pressure is 0. if not specified)

F-AX:

Calculated axial force at element ¹

F-LAT:

Calculated shear force at element ¹

PHI-FL:

Calculated angle of shear force vector ¹

M-TORS:

Calculated twisting moment in element ¹

M-BEN:

Calculated bending moment in element ¹

PHI-MB:

Calculated angle of bending moment vector in element ¹

R-LAT:

Calculated lateral total reaction acting on element (soil reaction plus support reaction if element is supported by a table-support) ¹ ²

PHI-RL:

Calculated angle of lateral soil reaction vector at element ¹ ²

SOILNB*F:

Specified neutral/real top soil load (overburden) at element multiplied by the general load factor ²

TOPLOAD*F:

Specified extra top load on soil at element multiplied by the general load factor ²

('Blank' if not to be taken into account, .0 if function warning TOPLOAD=0. has occurred.)

SUP-TOTAL:

Total horizontal soil support resulting from LAMBDA and/or SOILSUP from table CROSDAT ²

(The contribution of SOILSUP is obtained by multiplying the SOILSUP value by 0.866*DOUT)

The number of rows is the number of specified cross-sections (accumulated).

¹ in LOCAL element coordinate system (see output table ELEMNTS)

² undefined if there is no soil

H620511, last changed: 11/4/2020

See also: