<< Click here to display Table of Contents >> Navigation: Tables Reference > By Design Function > Design function 3.1: Pipe Data [GENPIPE] > Output tables > Pipe dimension data [PIPEDIM]:

Table error description

Contents

List of generated pipe dimension data based on elements list (Output Table)

Table questioned condition:

–In case an Outer diameter/wall thickness ratio ≤ 2.0 has been found at an element and the corresponding function error has occurred, the table will become questioned. In that case the corresponding T and D/T values are indicated [Error!].

–In case a Bend radius/diameter ratio ≤ 0.5 has been found at an element and the corresponding function error has occurred, the table will become questioned. In that case the BENDPAR value is indicated [Error!].

–In case a corrosion allowance/nominal wall thickness ratio > 0.5 has been found at an element and the corresponding function error has occurred, the table will become questioned. In that case the D/T value is indicated [Error!].

Table non-production condition:

–In case a function error concerning Material name or data has occurred, the table will not be produced.

Table locked data with warning(s) condition:

None (there are no conditions under which the output data table is locked with warning(s)).

H310523 (last modified: Jan 30, 2026)