Data description/Result options
Contents
List of generated pipe dimension data based on elements list (Output Table)
Data description/Result options:
ELEM:
Number of element(n)
DOUT:
Outer pipe diameter at element(n)
T-NOM:
Nominal pipe wall thickness at element(n)
T:
Nominal pipe wall thickness minus corrosion allowance at elem (n)
(T is wall thickness applied in pipeline 'beam' and nearly all stress calculations, including SHOOP in the ASME B31.8 option.)
T-MIN:
Minimum wall thickness at element (n)
(T-MIN is nominal pipe wall thickness minus fabrication tolerance and corrosion allowance. T-MIN is applied in the calculation of the hoop stress SHOOP (GENERAL and BELGIAN LAW options) and Sp (NEN 3650-2))
D/T:
Outer diameter/'beam'-wall thickness ratio at element(n)
L/D:
Element length/outer diameter ratio at element(n)
RADIUS:
Bend radius at element(n)
BENDPAR:
Bend parameter at element(n)
(The value of BENDPAR should not be less than 0.2 (see table description) The value of BENDPAR is undefined if ELEM is not a BEND element)
Effective deadweight of pipe
(Deadweight should include weight of possible coatings, pipe contents and buoyant forces if pipe is immersed.)
The deadweight is either determined by the contents of the input table DEADW or, when table DEADW is empty, calculated when the material weight in table ISTROP or ANTROP is assigned (also see deadweight calculation).
I-DIAM:
Inside pipe diameter at element(n)
O-DIAM:
Outside pipe diameter at element(n)
Both I-DIAM and O-DIAM are diameters including internal and/or external coating thicknesses defined in table COATING. For elements not having an internal and/or external coating these fields remain empty.
The number of rows is the number of elements.
H310521 (last modified: Apr 2, 2025)
See also: