List of maximum stresses over circumference due to lateral loadings on the cross-sectional ring (Output Table)

Data description/Result options:

ELEM:

Number of element where stress calculations have been performed at mid cross-section

SFUBA-M:

Maximum circumferential normal stress over wall thickness, stress component resulting from internal overpressure (all Fourier harmonics) ¹

(SFUBA is calculated with the average diameter (D-T) and the nominal wall thickness minus the corrosion allowance (T))

SFURA-M:

Maximum circumferential normal stress over wall thickness, stress component resulting from circumferential soil loadings (all Fourier harmonics) ¹

TXMRA-M:

Maximum radial/circumferential shear stress at mid-wall loc., stress component from circumferential soil loadings (all Fourier harmonics) ¹

SFIRA-M:

Maximum circumferential normal stress at inner wall location, stress component from circumferential soil loadings (all Fourier harmonics) ¹

SFORA-M:

Maximum circumferential normal stress at outer wall location, stress component from circumferential soil loadings (all Fourier harmonics) ¹

SXIRA-M:

Maximum longitudinal normal stress at inner wall location, poisson stress component from SFIRA-M ¹

SXORA-M:

Maximum longitudinal normal stress at outer wall location, poisson stress component from SFORA-M ¹

The number of rows is the number of specified cross-sections (accumulated).

¹ absolute (signed) maximum over circumference

H620531, last changed: 2007-07-30

See also: