Specification of number and location of joints (Input Table)

Data description/conditions:

REFIDENT:

Identification name of polygon point (n)

Optional

(Bend polygon points are not allowed, bend tangent points are.)

ΔAX-L: (toggleable)

Distance from polygon point along pipeline axis to (first) joint in polygon line (n)

Optional

(The first joint is not allowed to be situated in the start point of the pipeline, nor in a bend,
the last joint is not allowed to be situated in a bend nor in any end point.)

N-PIPE:

Number of pipe lengths L-PIPE starting from s-ax-l provided with a joint at the pipe end

> 0 / Undefined = 0.

(It is allowed that the last joint of the series is situated beyond the first polygon point after the first joint but not beyond the second polygon point after the first joint.)

L-PIPE:

Length of pipe (= distance) between two joints

> 0. / Undefined if n-pipe = undefined

E-PIPE:

Length of pipe (= distance) between last joint in series and final joint

> 0. / Undefined = 0.

(The last joint is not allowed to be situated in a bend or in an end point of the pipeline.)

JOINTREF:

Reference name for joint characteristics in input table JOINTS and/or JNTSPRS

Required name must be unique.
 
Pipes


H200191 (last modified: November 4, 2020)

See also:

Table description

Table error description