Specification of stress-strain relation of pipe material (Input Table)

Table description:

Through the input data table SIGEPS the applicable stress-strain relation for the pipe material is provided.

The pipe material may vary along the pipeline. Several stress-strain relations are available to be used in material non-linear calculations (only possible within module M). The default check strain is the allowable strain from NEN 3650:

CHKEPS = 7 ‰ if Re ≤ 360 N/mm2

CHKEPS = 5 ‰ if Re  > 360 N/mm2.

H310182, last changed: 11/4/2020

See also:

Data description/conditions

Table error description

Design Function 3.1