Table description:

The output data table CONDATA contains all connections defined in the tables CONNECT and SISPRC.

Tees can only be present in connection points specified by IDENTS in table CONNECT. The connection is assumed to be rigid. A tee consists of 2 run elements joining in the connection point and being in a direct line with each other, and one branch element perpendicular to the run elements.
A tee is identified by its CONNAME. The other tee data are specified in input table TEESPEC and reported in output table T-SDATA in Design Function 3.1.

Steel in steel pipelines can only be defined in sections where both an inner and an outer pipe are present. Additional connections (e.g. Rollers) can be specified in table SISPRC.The Roller connection is lateral fixed only.

H200611, last changed: 11/4/2020

See also:

Data description/conditions

Table error description

Design Function 2